Legacy Motors Presents FORUM 64
  New News New Releases List & Reviews Legacy Motors Auctions Forums Features Register FAQs Clubs
  Forum 24 ·  Forum 18 ·  Forum 43 ·  Forum 64 ·  The Lounge ·  Register ·  Help ·  Guidelines ·  Support Zone
 
 
  #1  
Old 04-29-2011, 04:11 PM
Chris Sweetman's Avatar
Chris Sweetman Chris Sweetman is offline
Super Moderator
 
Join Date: Oct 2009
Posts: 491
Smile PICS Scammell Tipper Truck .........

Lesney "Matchbox" "King Size"

Model: Scammell Contractor Tipper Truck

Reference number: K19

Scale: 1:69th according to Matchbox catalogues

Actual scale: 1:64th based on the short wheelbase Contractor and height to top of cab.

Length: overall 119mm wheelbase 74mm

Made in England

Lesney introduced their 'King Size' series into the 'Matchbox' line up in 1960. Interestingly 'King Size' was selected as the name because it related to the current 'Matchbox' series. Here matches linked to king sized cigarettes! This fact is mentioned in 'Collecting Matchbox Diecast Toys - The First Forty Years' by Kevin McGimpsey and Stewart Orr published for Matchbox International by Major Models in 1989. The 'King Size' series comprised of heavy duty work vehicles that were scaled to cars in the 'Matchbox' 1-75 series. As the 'King Size' series extended it did include cars but these were to a similar scale as those made by Corgi Toys and Dinky Toys.


Matchbox Scammell Tipper K16 3 by Chris*4, on Flickr


Matchbox Scammell Tipper K16 7 by Chris*4, on Flickr


Matchbox Scammell Tipper K16 6 by Chris*4, on Flickr


Matchbox Scammell Tipper K16 1 by Chris*4, on Flickr

This Scammell Tipper Truck was released in 1967. In the 1967 Matchbox catalogue it was 6/11 raising to 7/6 in 1968. However, this example was in a box that had 6/6 in pencil! The cab and chassis is one unit made from die-cast zinc alloy. This is stove-enamelled in bright red. A waterside transfer is applied to both cab doors. This transfer design is a white solid triangle enclosed in a white circle. On the model the triangle's apex is at the top but on the box graphics it is on the bottom! The scowl ended dumper body is also zinc alloy and is stove enamelled in deep yellow. It is connected to the chassis by a steel pin with domed heads. The movement of the dumper part is controlled by a 'Hydrosleeve'. This is a plastic unit held in the chassis to which the hook section on the dumper base is inserted. This arrangement allows the dumper body to be held in the raised position. The bright metal baseplate covers about half of the chassis and is mainly under the cab section. The baseplate extends forward of the cab for the bumper and also at the sides under the doors to represent steps. A bright metal finished casting represents the cab mounted air horns. Cab windows are tinted plastic. The wheels hubs are plastic as are the tyres. Wheels are single on the front axle and double on the two rear axles. Suspension is fitted on the front and centre axles. The third axle is mounted so that there is play within holes. This allows posing options without the need for suspension! Finally, a black plastic piece is used for the grille area. Unfortunately, seats and steering wheel are not included! However, Lesney's mould makers showed their skill in casting with the Scammell name in the intake mounted on the bonnet! Wow! I was so impressed with this that I just had to take a picture. It is included in this set.
__________________
Cheers Chris

Last edited by Chris Sweetman; 04-29-2011 at 04:20 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:02 PM.